WELCOME TO GOLDINHANDS  

                          MODEL TRAIN REPAIRS

          SPECIALIZING IN DC & TMCC CONVERSIONS

                        AND TRAIN ACCESSORIES    

Home

Cradles               

TMCC Conversions

DC & TMCC Installation Price List

TMCC Engine Sounds with Sound Commander

TMCC Signal Enhancer

TMCC & American Flyer Turnouts

How To Order

Order Form

Shipping Info

Contact Us

Show Schedule

Links

MEMBER TCA

The Mini Commander ACC is the only command control receiver that has configurable voltage and pulse durations for controlling your accessories.   All selection of the voltage and pulse settings is accomplished from the CAB-1^tm controller during the configuration phase.

·        Multiple Command Set                                                                                                                          
Responds to ENG and ACC commands.  When ENG is selected, uni-directional or bi-directional can motors are supported.

·        Built in Antenna
The built in antenna will suffice for many applications.  A connector is provided for an extension antenna when the signal exposure to the built in antenna is not sufficient.

·        Small Size
The footprint is only 1” x 2” in size.  This permits installation into many operating cars. No more operating tracks needed!  When the Mini Commander is installed in the operating car and trackside accessory, they become instantly movable to anywhere on your layout. Simply pick up power from the constant track power and use the accessory.

·        Four Outputs
For maximum flexibility, 2 high current (2.0A pulsed - 0.8A continuous) outputs and 2 low current (0.8A pulsed - 0.4A continuous) outputs are provided.

·        Multiple Output Functions
The outputs are capable of pulse, toggle, and strobe functionality.   The high current outputs are the most flexible allowing the voltage to be set (2-18v), the output mode (pulse or steady), and while in pulse mode the length of the pulse can be set (0.25 to 2.0 sec).   The low current outputs work as on / off outputs at a constant 9v.  One low current output is capable of strobe functionality.

                                Home     Cradles     TMCC Conversions     TMCC Engine Sounds      DC & TMCC Installation Price List

                               TMCC Signal Enhancer     TMCC & American Flyer Turnouts     Show Schedule     How To Order     Order Form

                                                                                 Shipping Info     Contact Us     Links

Send e-mail to customercare@goldinhands.com with questions or comments about this web site.
Copyright © 2005 Goldinhands